Customized Products

Customized Products

Flame Retardant Multi-core Instrument Cable Comply to:IEC60332-3

6C×20AWG TC/ LSZH/ Wrapping/ OS/ FR LSZH

Application:

These cables are specially designed for requirements concerning the smoke density and acidic gas emitted in

case of fire. FIRETOX Cables are made with well chosen materials that not only can fulfill the conventional

requirements of Low Smoke Halogen Free, but also can reduce flame propagation in those instance where fire

may develop.

Construction:

Conductor:Stranded annealed tinned copper wires to BS 6360, class 2

Insulation:Low smoke,zero halogen (LSZH) insulated

Nominal thickness: 0.4 mm

Wrapping:Polyester tape

Screen:Overall Aluminium/Polyester tape applied with the metallic side down in electrical contact with a 0.5 mm²

tinned copper drain wire(7*0.31mm formation).

A 23 micron polyester tape is applied over the screening tape with a minimum 50% overlap.

Sheathing:Flame retardant LSZH with anti-termite and anti-rodent additive

Nominal thickness: 0.7mm

Overall diameter: 6.59+/-0.2mm

Packing: The cables are delivered on non-returnable wooden drums.

Standard   IEC 60332-3

Physical characteristics:  

Temperature rating: -40 to +90℃ Minimum bending radius

                                  -for fixed wiring: 20mm

Flame retardant:  IEC60332-3

Water resistant:IEC60529

Fire Retardancy Characteristics (For LSZH sheath):      

Flame Propagation: IEC 332-1

Corrosive and Acid Gas Emission Test:  Hydrochloric acid yield less than 0.5% in accordance with IEC 60754-1&2

Smoke Density:Percentage of light transmitted is greater than 60% when tested in accordance with IEC 61034-

1&2

Flammability:Temperature Index is around 250-280 deg when tested according to ISO 4589 or BS 2782 Part 1 Method 143A & 143

Electrical characteristics:

Rated voltage : 300/500V 

Max conductor resistance at 20℃ : ≤33.8 Ohm/Km

Min insulation resistance : ≥100 M ohm/Km

Max inductance / resistance (L/R) ratio: 25 uH/ Ohm

Max. mutual capacitance at 1KHz:120 pF/m

Capacitance unbalance at 1khz:250 pF/ 250m

Test voltage:

core :core      1000V
core: screen  1000V